7 Series E66 745Li (N62) SAL
22 11 001
Replacing right engine mount (N62/N62TU)
Necessary preliminary tasks:
•
Secure engine in installation position
•
Release both engine mounts from above
•
Remove front underbody protection
•
Remove front wheels
•
Lower front axle support
•
Remove reinforcement plate
•
Observe safety instructions on raising the vehicle
Release screw connection for engine mount at bottom right.
Remove engine mount towards front.
Installation:
Lug (1) of engine mount must point to middle of vehicle.
Engine mount designations:
1.
Right engine mount: Even component number
2.
Left engine mount: Odd component number
RA Replacing right engine mount (N62/N62TU)
BMW AG - TIS
11.02.2013 08:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
