bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Lowering_raising Front Axle Carrier|Page 1098 > < 1 RA Replacing Front Axle Carrier|Page 1096
Page 1
background image

31 11 506

Lowering/raising front axle carrier

Special tools required:

00 2 030

00 2 040

31 4 011

31 4 012

33 3 274

Warning!

Danger to life!

Secure engine in installation position to prevent it from falling
down.

 

Important!

Observe safety instructions on raising the vehicle.

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Seal off hydraulic lines with plugs.

Necessary preliminary tasks:

Secure engine in installation position

Remove underbody protective plate.

Remove air duct for brake ventilation on both sides

Remove reinforcement plate

If necessary, remove steering gear cover on both sides

Remove universal joint from power steering gear

Disconnect plug connection on Servotronic converter

Disconnect plug connection from ride-height sensor

If necessary, disconnect vacuum line from electrically

operated valve to engine mounts at T-piece

If necessary, disconnect pressure line for power steering from

front axle carrier

RA  Lowering/raising front axle carrier

BMW AG - TIS

11.02.2013  09:16

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Lowering_raising Front Axle Carrier|Page 1098 > < 1 RA Replacing Front Axle Carrier|Page 1096