7 Series E66 745Li (N62) SAL
41 14 021
Replacing front left wheel arch
Read contents of Body, General.
Spot-weld bonding is used for the first time on the E65. A
specific procedure must be followed here.
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) Diagonal strut
-
(2) Wheel arch, front
-
(3) Support carrier, wheel arch, outer
Open weld joints in areas (1).
Remove support carrier (2).
Open weld joints in areas (1).
RA Replacing front left wheel arch
BMW AG - TIS
11.02.2013 12:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
