7 Series E66 745Li (N62) SAL
Check that adjoining body parts are flush in terms of height and
correct if necessary.
After adjustment, tighten hinge nuts and screws.
Note:
If necessary, adjust lock striker.
Detach cover (1) from door pillar.
Slacken screws (1) and (2), adjust lock striker and tighten
screws.
Note:
After slackening, lock striker should be positioned approx. 90
°
to door frame inner edge (3) and be movable.
When the door is closed, the lock striker must not touch or
scrape against the door lock. Look out for scratches.
RA Adjusting left or right front door
BMW AG - TIS
11.02.2013 12:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -