7 Series E66 745Li (N62) SAL
51 16 180
Removing and installing centre console
carrier section
Necessary preliminary tasks:
•
Remove centre armrest (front).
•
Remove side decorative trims
Release screws (1) on left/right.
Unfasten plug connection (1) and disconnect.
Unscrew nuts (2).
Raise centre console carrier section (3) in direction of arrow and
pull out.
Installation:
Make sure cables are correctly routed.
Installation:
Make sure air ducts (2) are correctly seated on centre console
carrier section (1).
RA Removing and installing centre console carrier section
BMW AG - TIS
11.02.2013 13:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -