7 Series E66 745Li (N62) SAL
Unlock plug connection (1) and disconnect from control unit.
Remove door trim panel (2).
Installation:
All clips (1) are white.
If necessary, replace faulty clips (1).
Important!
Make sure airbag badge is correctly fitted (risk of injury in
event of airbag deployment).
Installation:
After assembling the door trim panel proceed as follows:
-
Open door window.
-
Lock with vehicle key.
-
Check for ease-of-movement on retaining button linkage
-
If necessary, align linkages
RA Removing and installing left or right rear door trim panel
BMW AG - TIS
11.02.2013 15:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -