7 Series E66 745Li (N62) SAL
With special tool 00 9 321 (fishbone) through openings (1) for
fresh air grill, unclip wood trim (2) next to retaining pin (3).
Slide threaded pin (2) with wood trim (1) out of panel (3).
Remove wood trim (1) towards rear.
Installation:
Pin (1) and threaded pin (2) of wood trim (3) must not be
damaged.
Installation:
If necessary, replace damaged clips (1) (Hutfix).
No clip (Hutfix) is fitted in mounting (2).
RA Removing and installing/replacing wood trim on right
BMW AG - TIS
11.02.2013 15:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -