7 Series E66 745Li (N62) SAL
51 47 491
Removing and installing/replacing rear
underbody protection
Underbody protection, petrol/gasoline engines
Release screws (1).
Remove underbody protection (2) towards rear.
Installation:
Centre underbody protection (2) and tighten down screws (1).
Replacement:
Release screws (1).
Remove heat shield (2).
Underbody protection, diesel engines
Release screws (1 to 3).
Remove underbody protection (4) towards rear.
Installation:
Centre underbody protection (4) and tighten down
screws (1 to 3).
RA Removing and installing/replacing rear underbody protection
BMW AG - TIS
11.02.2013 15:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -