7 Series E66 745Li (N62) SAL
64 11 475
Removing and installing complete cooler box
Necessary preliminary tasks:
•
Remove cover (optional extra: cooler box)
Disconnect plug connection (1).
Unscrew nuts (2).
Remove compensating shims (3).
Installation:
Align cooler box centrally.
Make sure compensating shims (3) are in correct installation
position.
Tighten nuts (2) to specified torque: Tightening torque
64 11 5AZ
.
Release screws (1).
Release nuts (2) and remove holder (3).
Gently pull floor inlay (4) towards rear.
Pull out cooler box (5) in direction of arrow.
RA Removing and installing complete cooler box
BMW AG - TIS
11.02.2013 19:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
