7 Series E66 745Li (N62) SAL
Release screws (1).
If necessary, unclip plug connection.
Remove expansion valve cover (2) in direction of arrow.
Installation:
Retaining hooks (1) must engage fully in mounts (2).
Release screw (1).
Detach refrigerant lines (2) in direction of arrow.
Remove plate (3).
Release screws (1).
Detach refrigerant lines (2) in direction of arrow.
Remove plate (3).
Remove expansion valve.
RA Removing and installing or replacing expansion valve
BMW AG - TIS
11.02.2013 20:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
