7 Series E66 745Li (N62) SAL
Remove retainers (1).
Unlock retaining lugs (2) in direction of arrow and remove
defroster vents (3) towards top.
Installation:
Check retaining lugs (1) of defroster vent (2), replace defroster
vent if necessary.
Retaining lugs (1) of defroster vents must snap audibly into
place.
Disconnect plug connection (1).
Release screws (2).
Unclip control lever for fresh air flap (3).
Feed out servomotor bracket (4).
Installation:
Guide (1) of control lever for recirculating air flap (2) must be
exactly seated in mounting (3) of shutter cassette (4).
RA Removing and installing/replacing evaporator (High automatic A/C)
BMW AG - TIS
11.02.2013 20:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -