7 Series E66 750Li (N62TU) SAL
-
Connect the vehicle wiring harness triggering circuit wires to the repair cable
using butt connectors.
"Crimping connector elements".
In this case, the colour of the wire is of no relevance.
-
Route the repair cable to the B-pillar connector and connect into triggering circuit
wire sockets 11 and 12.
4.
Reassemble the vehicle. Refit any parts which have been removed (B-pillar connector,
B-pillar trim, door trim, etc.).
5.
Connect vehicle battery.
6.
Clear the fault memory.
Parts:
Description
Part number
Quantity
Repair cable for B-pillar
61 12 8 386 368
1 or 2
Repair cable for door
61 12 6 939 289
1 or 2
Butt connector
61 13 8 353 746
2 or 4
Shrink-fit hose
61 13 1 379 833
2 or 4
Reimbursement:
Material and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms.
Defect code
65 77 94 84 00
This defect code is not contained in the official
Defect Code Catalogue but has been included in
the system, thus enabling warranty claims to be
processed.
Within the framework of a visit to the workshop -
Install rear door and left or right-hand B-pillar
repair cable:
Job number
00 54 680
Labour
21 FRUs
Within the scope of a visit to the workshop - Install
rear door and left or right-hand B-pillar repair
cable:
with roller sun blind on rear door
Job number
00 54 681
Labour
26 FRUs
Within the framework of a visit to the workshop -
Install repair cables for rear doors and left and
right-hand B-pillars:
Job number
00 54 682
Labour
38 FRUs
Within the scope of a visit to the workshop - Install
repair cables for rear doors and left and right-hand
B-pillars:
-with roller sun blind on rear door
Job number
00 54 683
SI Side/thorax airbags, rear: resistance too high E65 E66
BMW AG - TIS
12.02.2013 12:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
