7 Series E66 750Li (N62TU) SAL
Align special tool 11 0 346 in direction of valve shaft.
Press down valve spring on spring cap, top, and remove valve
keys.
Important!
Incorrect installation possible.
Incorrect installation will result in valve spring breakage.
The color coding (1) is normally located on the lower end of
the valve spring.
Only the diameter is decisive for the correct installation of the
valve springs.
Install valve spring so that larger diameter points to spring
plate at bottom.
Arrangement:
1)
Valve
2)
Valve stem seal with spring plate, bottom
3)
Valve spring
4)
Top plate spring
5)
Valve tapers
RA Replacing all valve springs (N62TU)
BMW AG - TIS
12.02.2013 14:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -