8 Series E31 840i (M60-2) COUPE
Disconnect plug connection on oil pressure switch.
Place oil filter housing to one side.
Cut connections on alternator (illustration of connections, refer to
next figure).
Connections here illustrated on removed alternator.
Unfasten plug connection (1).
Unfasten nut (2).
Tightening Torque,
refer to Technical Data 12 31 1AZ
RA Replacing wiring harness section for engine (M60, M62)
BMW AG - TIS
03.02.2013 18:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -