8 Series E31 840i (M62) COUPE
Unfasten oil pump screws.
Remove oil pump.
Detach unrefined oil line (1) and governing line (2) (filtered oil)
from engine block.
If necessary, remove oil pressure control plunger.
Press sleeve downwards with suitable drift.
Caution!
High spring pressure.
Remove circlip.
Note:
1.
Control piston
2.
Spring
3.
Sleeve
4.
Circlip
RA Removing and installing/replacing oil pump (M62)
BMW AG - TIS
04.02.2013 11:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
