X Series E53 X5 3.0d (M57) OFFRD
Secure crankshaft in TDC position with special tool 11 2 300 .
Place special tool 11 6 321 on inlet camshaft.
Note:
Special tool 11 6 321 must lie flush on cylinder head.
Place special tool 11 6 321 on exhaust camshaft.
Note:
Special tool 11 6 321 must lie flush on cylinder head.
Remove special tool 11 6 321 from exhaust camshaft.
Remove special tool 11 6 322 .
RA Adjusting camshaft timing (M57)
BMW AG - TIS
03.02.2013 19:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -