bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Replacing Turbocharger Pressure Converter (M57)|Page 618 > < 5 RA Replacing Turbocharger Pressure Converter (M57)
Page 2
background image

Installation:

Feed lug (1) into link.

Press down fluid reservoir until it snaps audibly into place.

Withdraw cable (1) with profile seal from separating wall (3).

Unclip cable (2) from separating wall (3).

Release screw connections of separating wall (3) with body.

Remove separating wall (3).

Undo sealing cap (1).

Release screws (3).

Remove air cleaner cover (2).

Remove cover of intake muffler (4).

Release clamps (1 and 2).

Tightening torque,

refer to Technical Data 11 65 10AZ.

Detach charge air hose (3).

RA  Replacing turbocharger pressure converter (M57)

BMW AG - TIS

03.02.2013  19:18

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

5 RA Replacing Turbocharger Pressure Converter (M57)|Page 618 > < 5 RA Replacing Turbocharger Pressure Converter (M57)