X Series E53 X5 3.0d (M57) OFFRD
Release screws (1) and remove cover from electronics box.
Installation:
Tightening torque,
refer to Technical Data 12 90 4AZ.
Disconnect all plugs in control unit box.
Pull profile seals (1) out of electronics box.
Installation:
To prevent leaks, you must install profile seals correctly.
Release wiring harness holder on bulkhead.
Replace wiring harness section for engine.
Installation:
Insert fixtures (1) of cover for control unit box in openings (2).
RA Replacing wiring harness section for engine (M57)
BMW AG - TIS
03.02.2013 19:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -