X Series E53 X5 3.0d (M57) OFFRD
Press lines (1/2) in direction of heat exchanger and pull locking
ring towards rear.
Keep locking ring pressed and detach lines (1/2) from heat
exchanger.
Note:
Illustration shows heat exchanger from E46.
Pull out lock (1).
Pull heat exchanger (2) out of mounting plate on radiator.
Installation:
-
Press lock (1) downwards
-
Push heat exchanger (2) onto mounting plate
The lock must snap audibly into place when the heat exchanger is
forced on.
Installation:
Check O-rings (1), replace if necessary.
RA Removing and installing/replacing heat exchanger for automatic transmission (M62
BMW AG - TIS
03.02.2013 20:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
