bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing Complete Exhaust System M57 (with Front Exhaust Pipe)|Page 860 > < 1 RA Removing And Installing Complete Exhaust System M57 (without Front Exhaust Pipe)|Page 858
Page 1
background image

18 00 020 

Removing and installing complete exhaust
system M57 (with front exhaust pipe)

Warning!

Scalding hazard!

Only perform these tasks after exhaust system has cooled
down.

Release screws.

Remove underbody protection (1).

Release screws.

Release lock at bottom (2).

Release side lock (not shown). 

Pull out flap (1).

Release inner rubber mounts on both rear mufflers.

Release front 3 rubber mounts on exhaust system.

Caution!

Carry out following work step with a second person.

Release screw connection of exhaust system between front
pipe and turbocharger.

Tightening torque, 18 00 1AZ.

RA  Removing and installing complete exhaust system M57 (with front exhaust pipe)

BMW AG - TIS

03.02.2013  20:20

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing Complete Exhaust System M57 (with Front Exhaust Pipe)|Page 860 > < 1 RA Removing And Installing Complete Exhaust System M57 (without Front Exhaust Pipe)|Page 858