X Series E53 X5 3.0d (M57) OFFRD
Release screws and remove transmission cross-member.
Tightening torque, 27 00 10AZ .
Detach vent line (1).
Unclip cable from transfer case.
Release screws.
Tightening torque, 26 11 1AZ .
Installation:
Replace self-locking nuts.
When tightening screws down: Grip each screw and tighten
down nut. This prevents the flexible disk from being subjected
to torsion stress.
Grip propeller shaft at center mount and release nuts.
Tightening torque, 26 11 6AZ .
Installation:
Center bearing must be aligned at right angles to propeller
shaft.
RA Removing and installing transfer case (manual transmission)
BMW AG - TIS
03.02.2013 21:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
