X Series E53 X5 3.0d (M57) OFFRD
Release screws (1) and remove front differential.
Tightening torque: 31 50 7AZ
.
Carefully feed out front differential towards bottom.
Important!
If an assembly ring is already fitted, it must be removed.
Carry out this task before inserting new sealing ring with
assembly ring.
Installation:
Insert new sealing ring (1) in groove and apply antiseize agent.
Installation:
Push on assembly ring (1) up to sealing ring.
RA Removing and installing / replacing front differential (M57)
BMW AG - TIS
03.02.2013 21:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
