X Series E53 X5 3.0d (M57) OFFRD
37 14 511
Replacing front ride-height sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
After installation:
•
Check headlight adjustment, correct if necessary
•
Version with ride-height control: Carry out ride-height-
calibration
•
Initialize Run Flat Indicator
Disconnect plug connection (1).
Release nut (2) and disconnect jointed rod.
Tightening torque 37 14 7AZ
.
Unfasten screws (3) and remove height setting sensor.
Installation:
Sensor lever must point outwards from ride-height sensor.
Tightening torque 37 14 6AZ
.
Slacken nut (1).
Installation:
Holder must be located between both cast lugs (2).
Tightening torque 37 14 7AZ
.
RA Replacing front ride-height sensor
BMW AG - TIS
04.02.2013 00:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
