X Series E53 X5 3.0d (M57) OFFRD
Version from 12/05:
Buffer stops (1) are spring-mounted.
Buffer stops (1) must not be adjusted.
Buffer stops (1) can be retrospectively replaced.
Version up to 12/05:
Insert strip of paper between rear lid upper section and buffer
stop. Paper strip must be jammed but not tear off.
Insufficient contact pressure will result in rattling noises while
excessive pressure will cause the rear lid upper section to close
poorly.
Version from 12/05:
Test no longer necessary.
RA Fitting rear lid upper section
BMW AG - TIS
04.02.2013 01:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -