bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

10 RA Removing And Installing_replacing Seat Angle Adjuster On Left Or Right Front Sea|Page 2231 > < 9 RA Removing And Installing_replacing Valve Housing For Lumbar Cushion (comfort Seat
Page 1
background image

52 17 070

Removing and installing/replacing seat angle
adjuster on left or right front seat (comfort)

Necessary preliminary tasks:

Remove front seat

Remove outer cover

Release screws (1).

Release screw (2).

Unclip carrier (3) from seat mechanism at rear.

Unlock plug connection (1) on drive unit (2) and disconnect.

Release screws (1).

Installation:

Replace Taptite screws (1).

Tightening torque 52 10 16AZ

.

Release screw (2).

Tightening torque 52 10 17AZ

.

Remove seat angle adjuster (3).

Installation:

RA  Removing and installing/replacing seat angle adjuster on left or right front sea

BMW AG - TIS

04.02.2013  03:26

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

10 RA Removing And Installing_replacing Seat Angle Adjuster On Left Or Right Front Sea|Page 2231 > < 9 RA Removing And Installing_replacing Valve Housing For Lumbar Cushion (comfort Seat