bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

53 Condenser And Dryer With Lines > < 3 RA Removing And Installing_replacing Complete A_C Compressor (M57)
Page 2
background image

Remove fan cowl.

Detach water reservoir for windshield washer system and place
to one side.

Unfasten hose clip (1).

Installation:

Observe tightening torque, 11 65 10AZ.

Detach pressure pipe (2) in direction of arrow from upper
pressure hose (3) and remove.

Release screws (1) and detach lines.

Installation:

Replace sealing rings.

Observe tightening torque, 64 52 1AZ.

Disconnect plug connection (4).

Note:

Secure A/C compressor (5) against falling out.

Release screws (2) and remove A/C compressor (5).

Installation:

Make sure grounding cable (3) is correctly seated.

RA  Removing and installing/replacing complete A/C compressor (M57)

BMW AG - TIS

04.02.2013  06:10

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

53 Condenser And Dryer With Lines > < 3 RA Removing And Installing_replacing Complete A_C Compressor (M57)