X Series E53 X5 3.0d (M57TU) OFFRD
Disconnect plug connector (1).
Release screws and lift out shift tower (2) a little.
Tightening torque 25 16 3AZ .
Unhook interlock cable.
Remove shift bracket with cable.
Installation:
Check interlock/shiftlock function and if necessary adjust.
Installation E53:
Insert rubber seal (1) of shift cable (2) in transmission tunnel
(3).
Installation:
Secure leads using cable ties.
RA Removing and installing/replacing shift tower (Steptronic)
BMW AG - TIS
05.02.2013 04:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -