X Series E53 X5 3.0d (M57TU) OFFRD
![background image](/bmw/X_Series_E53/X5_3.0d_M57TU_OFFRD/page-416001.png)
26 20 000
Removing and installing front propeller shaft
Important!
Do not move car by means of engine power once drive shaft
has been removed.
Necessary preliminary tasks:
•
Remove reinforcement plate.
Important notes on installation are described in this work step.
Unfasten screws.
Installation:
Replace self-locking nuts.
Tightening torque 26 11 7AZ/8AZ
.
Push propeller shaft back.
Remove flexible disk with centering flange.
RA Removing and installing front propeller shaft
BMW AG - TIS
05.02.2013 04:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -