X Series E53 X5 3.0d (M57TU) OFFRD
65 77 016
Removing and installing airbag control unit
Special tools required:
•
11 4 190
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Disconnect battery negative lead and cover.
Check system after installation.
Vehicle with rear compartment fan:
Remove complete rear compartment fan.
Release screws (1) and remove cover (2).
Disconnect plug connection (1).
Release nuts (2) and lift off airbag control unit (3).
Installation:
Ensure grounding cable (4) is correctly laid.
Tightening torque, 65 77 1AZ .
RA Removing and installing airbag control unit
BMW AG - TIS
05.02.2013 17:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -