X Series E53 X5 3.0i (M54) OFFRD
Lever out spring (1) with a screwdriver from lug (2) on housing.
Tilt spring (1) upwards.
Remove bearing pin (1).
Installation:
Grease bearing pin (1).
Grease,
refer to BMW Service Operating Fluids.
Support engine at front with a hydraulic lifter.
Caution!
Do not allow the transmission to hang off from the
transmission input shaft as this will deform the clutch plate.
RA Removing and installing transmission (S5D 280Z, M54)
BMW AG - TIS
06.02.2013 18:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -