X Series E53 X5 3.0i (M54) OFFRD
Disconnect battery negative lead.
Remove exhaust system.
Remove heat shield on right.
M54:
Unclip cable of oxygen sensors.
Important!
The section "Removing and installing reinforcement plate"
contains important installation instructions.
Remove reinforcement plate.
Remove front splash guard.
Release stabilizer and slide forwards. This operation is described
in the section "Removing and installing front stabilizer".
Remove and install front propeller shaft.
Unclip vent line from transmission at holder (engine).
RA Removing and installing automatic transmission (A5S 360R / 390R)
BMW AG - TIS
06.02.2013 18:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
