X Series E53 X5 3.0i (M54) OFFRD
25 11 245
Replacing shift-arm support
Note:
Do not twist knob during removal as this would cause the
turning lock in the knob to shear off.
Tug firmly to remove knob.
Installation:
Fit knob on selector lever, align and press on until it snaps
noticeably into place.
Installation:
Push rubber gaiter (1) down until groove (2) is fully exposed.
Press installation frame of rubber gaiter together slightly.
Remove rubber gaiter from center console.
Installation:
Push rubber gaiter (1) down and attach to selector lever (2).
Pull rubber gaiter (1) over selector lever and insert in center
console.
RA Replacing shift-arm support
BMW AG - TIS
06.02.2013 18:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
