X Series E53 X5 3.0i (M54) OFFRD
Draw in drive flange (1) with special tools 31 2 113 ,
33 3 268 , 33 3 266 and 33 3 261 .
Install swivel bearing.
Draw output shaft into drive flange.
Install front brake disc.
Install front brake caliper.
Replace collar nut, apply a light coating of oil to contact surface
and tighten down.
Tightening torque 31 21 2AZ
.
Secure collar nut by peening on flat areas of output shaft.
Install front wheel.
RA Replacing bearing (45 mm) for front wheel (build date up to 04/2000)
BMW AG - TIS
06.02.2013 19:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -