X Series E53 X5 3.0i (M54) OFFRD
Remove upper section of suction filter housing with mass air flow
sensor.
Assemble special tool 00 0 200 with special tools 00 0 201 /
00 0 202 / 00 0 204 / 00 0 208 and fit.
Attach special tool 11 0 020 as shown in illustration to special
tool 00 0 200 .
Secure special tool 11 0 020 to front and rear engine
suspension eyes.
Important!
Make sure no lines or cables on rear side of engine are
damaged by chain.
The supports (1) of special tool remove
00 0 208 must
make contact with the screws on the side walls.
Tighten down screws (1 and 2).
RA Removing and installing / replacing front differential (M54)
BMW AG - TIS
06.02.2013 19:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -