X Series E53 X5 3.0i (M54) OFFRD
Tightening torque and installation instructions for front axle carrier.
Remove left engine mount.
Pull off vent hose.
Release screws (1) and remove front differential.
Tightening torque: 31 50 7AZ
.
Carefully feed out front differential towards bottom.
Important!
If an assembly ring is already fitted, it must be removed.
Carry out this task before inserting new sealing ring with
assembly ring.
RA Removing and installing / replacing front differential (M54)
BMW AG - TIS
06.02.2013 19:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -