X Series E53 X5 3.0i (M54) OFFRD
Lift out snap ring (1) and take off with sleeve (2).
Installation:
Fit bush (2).
Install snap ring (1) with special tool 32 1 090 / 32 3 070 and
steering wheel screw until it snaps into place in groove of steering
spindle.
Lift out steering spindle bearing.
Take out bearing inner sleeve.
Installation:
Insert bearing inner sleeve with bevelled end pointing to steering
lock.
RA Dismantling and assembling complete steering column
BMW AG - TIS
06.02.2013 20:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
