X Series E53 X5 3.0i (M54) OFFRD
Take off collar (1).
Installation:
Check position of collar (1) relative to snap ring (2).
If necessary, remove cable for interlock from steering lock.
Unfasten screws.
Detach plug and remove stalk fixture for steering column.
Remove clamping bolt.
Press down on steering spindle.
Installation:
Clamping screw must be located in retaining groove of steering
spindle.
Replace self-locking nut.
Tightening torque 32 31 1AZ
.
RA Removing and installing steering column
BMW AG - TIS
06.02.2013 20:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
