X Series E53 X5 3.0i (M54) OFFRD
33 31 011
Replacing rear axle carrier
Necessary preliminary tasks:
•
Remove complete rear axle carrier and if necessary with
other workers assisting set down on a suitable surface
•
Remove rear differential
•
Remove stabilizer link on both sides from swinging arm
•
Remove stabilizer from rear axle carrier
•
If necessary, remove ride-height sensor with holder from rear
axle carrier
Remove swinging arm on both sides from rear axle carrier.
Remove control arm on both sides from rear axle carrier.
Remove guide arm on both sides from rear axle carrier.
Remove wheel carrier on both sides with output shaft, swinging
arm and suspension arms.
After installation:
•
Version with ride-height control:
-
Activate and fill air suspension system
•
Adjusting handbrake
•
Perform chassis alignment check
RA Replacing rear axle carrier
BMW AG - TIS
06.02.2013 20:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -