bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 RA Draining_filling Air Spring System (twin-axle Ride-height Control)|Page 1646 > < 8 RA Draining_filling Air Spring System (ride-height Control)|Page 1644
Page 1
background image

37 00 100

Draining/filling air spring system (twin-axle
ride-height control)

Warning!

Danger of injury!

Drain the air spring system before carrying out any work on
the air supply unit, air pipes and air springs! Danger of injury if
this instruction is not complied with!

 

Risk of damage!

The vehicle must not stand on its wheels when the air spring
struts and air springs are depressurized! Otherwise the air
spring struts and air springs will be damaged and later
destroyed during driving!

Extreme cleanliness must be ensured in the connection area
of the pipes during removal and installation. Even the smallest
of dirt particles can cause leakage in the air spring system.

Note:

Read and comply with notes on air spring system.

Deactivating air spring system:

Raise vehicle on lifting platform.

Remove ignition key.

Pull fuse for control unit

Draining air spring system:

Remove right underbody panelling

 

Important!

Risk of damage!

Do not kink, twist or crush pipes.

To avoid incorrect activation of the air spring struts and air
springs, do mix up the pipes at the valve unit connection.

RA  Draining/filling air spring system (twin-axle ride-height control)

BMW AG - TIS

06.02.2013  21:51

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Draining_filling Air Spring System (twin-axle Ride-height Control)|Page 1646 > < 8 RA Draining_filling Air Spring System (ride-height Control)|Page 1644