X Series E53 X5 3.0i (M54) OFFRD
51 12 742
Replacing one impact absorber for rear
bumper
(bumper removed)
If necessary, remove rear bumper.
Remove support on side member,
refer to Removing trim for tail panel, top.
Release nuts (1) on inside and remove shock absorber.
Installation:
Tightening torque 51 12 3AZ.
RA Replacing one impact absorber for rear bumper
BMW AG - TIS
06.02.2013 23:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
