X Series E53 X5 3.0i (M54) OFFRD
Unhook Bowden cable for release lever:
-
Tighten release lever (1).
-
Lever out lock (2).
-
Detach Bowden cable towards inside/rear.
Installation:
Press unlocking lever (1) for installation fully on door trim panel.
Version with additional speaker:
If necessary, disconnect plug connection (1) on additional speaker
(2).
Remove door trim panel (3).
Installation:
Clips (1) are longer than the other clips.
Clips (1) are gray, the other clips are white.
Fit all clips with sealing ring.
If necessary, replace faulty clips.
Installation:
After assembling the door trim panel proceed as follows:
-
Open door window.
-
Lock with vehicle key.
-
Check whether linkage of safety button can move freely.
-
If necessary, align linkages.
RA Removing and installing rear left or right door trim panel
BMW AG - TIS
07.02.2013 00:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
