X Series E53 X5 3.0i (M54) OFFRD
51 48 ...
Removing and installing/replacing sound
insulation in rear door, left or right
Special tools required:
•
00 9 317
Remove rear door trim panel.
If necessary, remove airbag module in rear door.
Using special tool 00 9 317 (trim panel wedge), lever out
sealing bead ( 1) of sound insulation (2) completely or if necessary
partially.
Installation:
In event of replacement or partial detachment, lay butylene tape
(sourcing reference: BMW Parts Service) on inner door plate or
sound insulation.
Seal cable penetrations with butylene tape.
RA Removing and installing/replacing sound insulation in rear door, left or right
BMW AG - TIS
07.02.2013 00:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
