X Series E53 X5 3.0i (M54) OFFRD
51 71 378
Removing and installing/replacing underride
protection
Necessary preliminary tasks:
•
Remove front bumper trim.
•
Remove front underbody protection
Note:
The operation is described on the left side; proceed in the same
way for the right side.
Version up to 10/03:
Lever out catches (1) and detach brake air duct (2).
Installation:
Fixtures (1) on brake air duct (2) must not be damaged.
Build date from 10/03:
Release expansion rivet (1).
Lever out catches (2) and detach brake air duct (3).
RA Removing and installing/replacing underride protection
BMW AG - TIS
07.02.2013 00:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -