bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Removing And Installing_replacing Lock For Left Rear Seat Backrest (through-load|Page 2307 > < 6 RA Removing And Installing _replacing Actuating Mechanism For Left Rear Seat Backre|Page 2305
Page 1
background image

52 26 309

Removing and installing/replacing lock for left
rear seat backrest (through-loading system)

Slide lock trim on edge of backrest side upwards slightly and clip
out to one side, then slide trim section on rear side slightly to
center, unclip and remove.

Installation:

Clips of trim must not be damaged.

Partially lift cover (1) off rear seat backrest.

E46 only:

Remove lockplate (1) and unhook actuating rod (2) for seatback
release.

E83 only:

Lockplate (1) omitted. Unhook actuating rod (2) for seatback
release.

Installation:

Fit bush (3) and new lockplate (1).

RA  Removing and installing/replacing lock for left rear seat backrest (through-load

BMW AG - TIS

07.02.2013  01:25

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing And Installing_replacing Lock For Left Rear Seat Backrest (through-load|Page 2307 > < 6 RA Removing And Installing _replacing Actuating Mechanism For Left Rear Seat Backre|Page 2305