X Series E53 X5 3.0i (M54) OFFRD
64 11 271
Replacing water valve for heater
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
M57 only:
Release fuel cooler and place to one side.
All:
Unfasten cable clip (1).
Disconnect connector (2).
Unfasten cable tie (3).
Pull out water valve for heater (1) towards top.
Release hose clamps (2) and detach water hoses.
Remove water valve for heater (1).
Installation:
If necessary, replace grommets or rubber mount (4).
Feed pilot pin (3) into rubber mount (4).
Fill and vent cooling system.
RA Replacing water valve for heater
BMW AG - TIS
07.02.2013 03:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
