bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Removing And Installing Engine (M62)|Page 405 > < 6 RA Checking Absolute Compression Of All Cylinders
Page 1
background image

11 00 050

Removing and installing engine (M62)

Instructions for disconnecting and connecting battery,

refer to General Information MG12.

Disconnect negative battery lead.

Remove heater bulkhead,

refer to 51 71 080.

Lift engine hood into assembly position.

Note:

The following work must be carried out with a second person
assisting. Work instruction applies to left and right sides.

Gently raise retaining clip and simultaneously push upwards.

Hold engine hood, unhook damper on hood. Open engine
hood fully and reattach damper with special tool 51 2 170
to hood.

Turn fasteners on acoustic cover 90

°

 counterclockwise, remove

acoustic cover.

RA  Removing and installing engine (M62)

BMW AG - TIS

08.02.2013  01:34

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing And Installing Engine (M62)|Page 405 > < 6 RA Checking Absolute Compression Of All Cylinders