X Series E53 X5 4.4i (M62) OFFRD
11 22 500
Removing and installing/replacing flywheel
(M62 / S62)
(clutch removed)
Caution!
Once the flywheel has been replaced, the pulse generator
must be reset,
refer to 12 14 520.
Block flywheel with special tool 11 2 070.
Release and tighten the flywheel (ZMS) only with special
tool 11 4 180.
Installation:
Tightening Torque,
refer to Technical Data 11 22 1AZ.
RA Removing and installing/replacing flywheel (M62 / S62)
BMW AG - TIS
08.02.2013 01:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
