X Series E53 X5 4.4i (M62) OFFRD
M62 B35 / B44 only:
Lightly coat pistons and piston rings with oil.
Align contact points of piston rings (offset at approx. 120
°
, but not
over piston pin lug).
Press together piston rings using special tool 11 2 260.
Install piston so that arrow points to camshaft drive.
Entire circumference of tightening strap must rest firmly on engine
block.
Important!
Danger of piston ring failure.
Press in piston only with finger force (do not knock in!).
Attach crankpin to connecting rod.
Apply light coat of oil to connecting-rod bearing shells.
Fit bearing caps so that pair numbers match up.
Install new conrod bolts.
RA Removing and installing / replacing all pistons (M62)
BMW AG - TIS
08.02.2013 01:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -