X Series E53 X5 4.4i (M62) OFFRD
Attach special tool 11 6 440 to camshaft adjustment unit on
cylinder bank 5 to 8 and move at 40 Nm to left-hand stop.
Check left-hand stop of camshaft adjustment unit with acoustic
continuity test on multimeter.
Note:
Rotating the camshaft adjustment unit at 40 Nm to the left-hand
stop ensures that the end position is reached and there is no
longer an "oil cushion" before the left-hand stop of the camshaft
adjustment unit.
In the camshaft adjustment unit, there are three contacts which
are closed when the unit is at the left-hand stop.
During the acoustic continuity test with the multimeter, a sound
signal can be heard when the camshaft adjustment unit is at the
left-hand stop.
Caution!
Left-hand threads.
Tighten screw connection (2) of inlet camshaft on cylinder
bank 5 to 8 to an initial torque of 15 Nm and then slacken off
again by a 1/4 turn.
Caution!
Left-hand threads.
Tighten screw connection (1) of exhaust camshaft on cylinder
bank 5 to 8 to an initial torque of 15 Nm and then slacken off
again by a 1/4 turn.
RA Adjusting camshaft timing (M62 VANOS from 9/98)
BMW AG - TIS
08.02.2013 02:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -