X Series E53 X5 4.4i (M62) OFFRD
Tighten down bearing caps of camshafts on cylinder
bank 1 to 4 in 1/2 turn increments uniformly from inside to
outside.
Tightening torque, 11 31 1AZ
.
Rotate camshafts until camshaft designation points upwards.
Attach special tool 11 2 445 /
11 2 441 to camshafts,
cylinder bank 1 to 4.
Caution!
Do not damage the cylinder head.
If necessary, machine open-end wrench accordingly.
Align inlet and exhaust camshafts with open-end wrench in such a
way that special tools 11 2 445 /
11 2 441 rest without a
gap on cylinder head.
RA Replacing right camshaft (M62 VANOS from 9/98)
BMW AG - TIS
08.02.2013 02:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
